# /etc/bootptab: database for bootp server (/etc/bootpd)
# Last update: gwr, Sun Dec 12 19:00:00 EDT 1993
# Blank lines and lines beginning with '#' are ignored.
#
# Legend:	(see bootptab.5)
#	first field -- hostname (not indented)
#	bf -- bootfile
#	bs -- bootfile size in 512-octet blocks
#	cs -- cookie servers
#	df -- dump file name
#	dn -- domain name
#	ds -- domain name servers
#	ef -- extension file
#	gw -- gateways
#	ha -- hardware address
#	hd -- home directory for bootfiles
#	hn -- host name set for client
#	ht -- hardware type
#	im -- impress servers
#	ip -- host IP address
#	lg -- log servers
#	lp -- LPR servers
#	ns -- IEN-116 name servers
#	ra -- reply address
#	rl -- resource location protocol servers
#	rp -- root path
#	sa -- boot server address
#	sm -- subnet mask
#	sw -- swap server
#	tc -- template host (points to similar host entry)
#	td -- TFTP directory
#	to -- time offset (seconds)
#	ts -- time servers
#	vm -- vendor magic number
#	Tn -- generic option tag n
#
# Be careful about including backslashes where they're needed.  Weird (bad)
# things can happen when a backslash is omitted where one is intended.
# Also, note that generic option data must be either a string or a
# sequence of bytes where each byte is a two-digit hex value.

# First, we define a global entry which specifies the stuff every host uses.

# If you leave "td" empty, run bootpd with the "-c /tftpboot" switch
# so path names (boot files) will be interpreted relative to the same
# directory as tftpd will use when opening files.
.default:\
	:hn:dn="mc.com":\
	:td=/tftpboot:\
	:ds=merlin, jericho:\
	:to=auto:

# Next, we can define different master entries for each subnet. . .

.subnet16:\
	:tc=.default:\
	:sm=255.255.255.0:\
	:gw=merlin:\
	:sa=merlin:

.subnet17:\
	:tc=.default:\
	:sm=255.255.255.0:\
	:gw=merlin-gw:\
	:sa=merlin-gw:

#
# We should be able to use as many levels of indirection as desired.  Use
# your imagination. . .
#

# Individual entries (could also have different servers for some/all of these
# hosts, but we don't really use this feature at CMU):

# Emulex terminal server
emulex:	tc=.subnet16:ha=00.00.C9.00.42.E0:bf=P4KTL0E:

# Lantronix eps1
eps1:	tc=.subnet16:ha=00.80.A3.04.1D.78:

# Tadpole 885 board.
tp885:  tc=.subnet17:ha=08.00.4C.00.2F.74:bf=tp885sys2.cfe:

# MVME147 VxWorks board.
#mvme147:tc=.subnet17:ha=08.00.3e.20.da.47:bf=mv147vxw.st:

# These are just for testing
bach:  tc=.subnet16:ha="08:00:20:04:98:8d":bf=boot.sun4m:
xanadu:tc=.subnet17:ha="00:80:42:42:04:c7":bf=boot.sun4c:
